3.6 inča E Ink Spectra 6 (E6) ekran u boji, 600 x 400, SPI,
3.6 inča E Ink Spectra 6 (E6) ekran u boji, 600 x 400, SPI, - Slika 2
3.6 inča E Ink Spectra 6 (E6) ekran u boji, 600 x 400, SPI, - Slika 3
3.6 inča E Ink Spectra 6 (E6) ekran u boji, 600 x 400, SPI, - Slika 4
3.6 inča E Ink Spectra 6 (E6) ekran u boji, 600 x 400, SPI, - Slika 5

5,399 RSD (Sa PDV-om)

3.6 inča E Ink Spectra 6 (E6) ekran u boji, 600 x 400, SPI,

Nema na stanju

Šifra proizvoda: w32650 Kategorija: Oznaka: Težina proizvoda: 68 g

Opis

SKU:32650
Part No.:3.6inch e-Paper HAT+ (E)
Brand:Waveshare

Korisne informacije: www.waveshare.com/wiki/3.6inch_e-Paper_HAT+_(E)

3.6inch E Ink Spectra 6 (E6) Full color E-Paper Display, 600×400 Pixels, SPI Communication, Optional For HAT+ Standard Driver Board, E-ink Display

3.6″ full color e-Paper display

low power, wide viewing angle, paper-like effect without electricity

Ideal for price tags, shelf labels, industrial instruments…3.6inch e-Paper HAT+ (E), front view

Note: the driver board is optional, please refer to the Package Content for detailed part list
3.6inch e-Paper HAT+ (E)
3.6inch e-Paper HAT+ (E)
with driver board

Features at a glance

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32)
  • Optional for e-Paper driver board:
    • Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards and Jetson Nano
    • Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
    • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32 / ESP32, etc.
    • Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

operating voltage Raw display: 3.3V display color E6 full color
(E Ink Spectra 6)
with driver board: 3.3V/5V
interface 3-wire SPI, 4-wire SPI grey scale 2
outline dimensions Raw display: 86.60 × 56.00 × 0.78 (mm) full refresh time 15s
with driver board: 89.50 × 59.00 (mm)
display size 76.20 × 50.80 (mm) refresh power <100mW
DOT PITCH 0.127 × 0.127 (mm) standby current of Raw display <0.01uA (almost none)
RESOLUTION 600 × 400 pixels viewing angle >170°

E Ink Spectra 6 technology

E Ink Spectra 6 is a newly launched full color e-paper technology that brings fresh vitality to the e-paper industry with excellent color performance, high resolution and high contrast.
Adopts red, yellow, and blue as the primary colors, it offers more possibilities for e-paper color display, featuring high contrast and high saturation to make images clearer and colors brighter.

E Ink Spectra 6 technology introduction 1

Spectra displays are made of millions of Microcups which suspend the four different colored particles in clear fluid.

E Ink Spectra 6 technology introduction 2By applying a negative charge the red particles rise to the top and become visible

E Ink Spectra 6 technology introduction 3A split charge raises blue particles to the top and become visible

More advanced performance

The resolution is up to 200ppi, features a wider range of operating temperature and faster screen refresh time. And it is more power-saving, aligning with ESG trends for energy efficiency and carbon reductionComparison of e-Paper display technologies

Innovative microcup full color technology platform

Using blue charged particles to produce six primary colors, and employing dithering technology to create vivid and saturated full color images.3.6inch E Ink Spectra 6 (E6) Full-color E-Paper Display, supports full-color image display

Advantages of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Optional for e-Paper driver board

Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, Jetson Nano3.6inch E Ink Spectra 6 (E6) Full-color E-Paper Display with 40PIN GPIO header

* for reference only, the Raspberry Pi is NOT included.

Onboard SPI control interface

for use with controller boards like Raspberry Pi / Arduino / STM32 / ESP32

3.6inch e-Paper with driver board, Onboard SPI control interface

PWR Power on/off control
BUSY Busy status output pin
RST External reset, low active
DC Data/Command selection (high for data, low for command)
CS SPI chip selection, low active
CLK SPI CLK pin
DIN SPI MOSI pin
GND Ground
VCC Power (3.3V / 5V input)

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs3.6inch e-Paper with driver board, onboard voltage translatorNew HAT+ Standard

Application examples

Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags…

Outline dimensions

3.6inch e-Paper HAT+ (E)

3.6inch e-Paper (E) and driver board, outline dimensions

Package content:

Weight: 0.053 kg

3.6inch e-Paper HAT+ (E)

  1. 3.6inch e-Paper HAT+ (E) x1
  2. GH1.25 9PIN cable 20cm x1
  3. Screws pack x1
13.6inch e-Paper HAT+ (E)
2
2

Dodatne informacije

Težina 68 g

Deklaracija

Šifra: w32650
Naziv: 3.6inch e-Paper HAT+
Vrsta: Waveshare
Zemlja porekla: Kina
Zemlja uvoza: Kina
Uvoznik: MALINA 314 doo, Beograd
Telefon: 061-640-2013

Recenzije

Još nema komentara.

Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.

Povezani proizvodi