USB (tip C) na UART Board (TTL)
USB (tip C) na UART Board (TTL) - Slika 2
USB (tip C) na UART Board (TTL) - Slika 3
USB (tip C) na UART Board (TTL) - Slika 4
USB (tip C) na UART Board (TTL) - Slika 5

390 RSD (Sa PDV-om)

USB (tip C) na UART Board (TTL)

3 na zalihama

Šifra proizvoda: w20645 Kategorija: Oznaka: Težina proizvoda: 8 g

Opis

SKU: 20645
Part Number: PL2303 USB UART Board (Type C)

Korisne informacije: PL2303_USB_UART_Board_(Type_C)

PL2303 USB To UART (TTL) Communication Module, USB-C Connector
PL2303 USB-C To UART Module

Adopts PL2303, Compatible With 1.8V/2.5V/3.3V/5V Logic Level

Features At A Glance
  • Adopts PL2303GS new version device
  • Supports windows XP/7/8/10/11/…
  • 3x VCCIO power mode via jumper setting:
    • VCCIO – 5V: 5V output
    • VCCIO – 3.3V: 3.3V output
    • open the jumper: powered from target board (1.8V/2.5V/3.3V/5V)
  • 3x LED indicators: TXD, RXD, PWR
PL2303 Solution

Adopts PL2303GS New Version Device

Hardware Connection

In The Case Of Working With MCU

  • VCCIO ↔ 3.3V or 5V output (the module is powered from USB, and the onboard jumper should be shorted to 3.3V or 5V)
  • GND ↔ GND
  • TXD ↔ MCU.RX (signal direction: MCU.RX << PL2303 << PC.TX)
  • RXD ↔ MCU.TX (signal direction: MCU.TX >> PL2303 >> PC.RX)
CAUTION: the module is compatible with TTL level ONLY, to avoiding any damage, please DON’T direct connect it to RS232 circuit.
Outline Dimensions

 

PACKAGE CONTENT

Weight: 0.008 kg

  1. PL2303 USB UART Board (Type C) x1
  2. 4-pin custom connector jumper wire x1
1
2

Dodatne informacije

Težina 8 g

Deklaracija

Šifra: w20645
Naziv: USB (type C) na UART Board (TTL) za Raspberry Pi
Vrsta: Waveshare
Zemlja porekla: Kina
Zemlja uvoza: Kina
Uvoznik: MALINA 314 doo, Beograd
Telefon: 061-640-2013

Recenzije

Još nema komentara.

Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.

Povezani proizvodi