1,690 RSD (Sa PDV-om)
L76K GNSS Modul za Raspberry Pi Pico, GPS / BeiDou (BDS) / GLONASS / QZSS, A-GNSS
1 na zalihama
Opis
SKU: 31752
Part No.: Pico-GPS-L76K
Brand: Waveshare
Korisne informacije: http://www.waveshare.com/wiki/Pico-GPS-L76K
GNSS module based on L76K, designed for Raspberry Pi Pico
The Pico-GPS-L76K is a GNSS module designed for Raspberry Pi Pico, supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function, and offers advantages such as fast positioning, high accuracy, and low power consumption. Combined with the Raspberry Pi Pico / Pico 2, it’s easy to use global navigating function.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
- Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS
- Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity
- Built-in SAW Filter for enhanced noise reduction performance
- Supports AGNSS
- UART communication baudrate: 4800~115200bps (9600bps by default)
- Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
- 4x LEDs for indicating the module operating status
- Comes with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
| GNSS parameters | |
|---|---|
| GNSS | GPS/GLONASS/BDS/QZSS |
| Chip Platform | AT6558R |
| L1 Band Receiver (Channels) |
32 tracking ch/ 72 acquisition ch |
| L1 Band Receiver SBAS |
N/A |
| A-GNSS | Support |
| Sensitivity （Acquisition） |
-148dBm |
| Sensitivity (Re-acquisition) |
-160dBm |
| Sensitivity (Tracking) |
-162dBm |
| TTFF (Time to first fix) Cold starts |
30s, Autonomous 5.5s, With AGNSS |
| TTFF (Time to first fix) Hot starts |
2s |
| Position accuracy | 2.0m CEP |
| Speed accuracy | 0.1m/s |
| Acceleration accuracy(Max) | 0.1m/s² |
| Timing accuracy | 30ns |
| Others | |
| Communication interface | UART |
| Baudrate | 4800~115200bps (9600bps by default) |
| Update rate | 1Hz (default), 5Hz (max) |
| Protocols | NMEA 0183, CASIC Proprietary Communication Protocol |
| Power supply voltage | 5V |
| Overall current consumption | < 40mA@5V (Continue mode) |
| Operating temperature | -40℃ ~ 85℃ |
| Dimensions | 55.95 × 21.00 (mm) |
onboard female pin header for direct attaching to Raspberry Pi Pico 2
supports GPS, Beidou(BDS), Glonass, QZSS
Augment system is aimed at improving the accuracy, integrity, reliability, and availability of positioning and navigation
Supports A-GNSS augment system
- L76K module
- Battery holder
supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts - GNSS antenna connector
- Raspberry Pi Pico header
- Standby mode switch
- GNSS configuration button
- RT9193-33
power chip - Status indicators
RXD/TXD: UART TX/RX indicator
PPS: GPS status indicator
PWR: power indicator
Weight: 0.076 kg
- Pico-GPS-L76K x1
- GPS Antenna x1
Dodatne informacije
| Težina | 81 g |
|---|
Deklaracija
| Šifra: w31752 |
| Naziv: Pico-GPS-L76K |
| Vrsta: Waveshare |
| Zemlja porekla: Kina |
| Zemlja uvoza: Kina |
| Uvoznik: MALINA 314 doo, Beograd |
| Telefon: 061-640-2013 |
Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.
Povezani proizvodi
-
- Nema na stanju
- mikrokontroler
ESP32-P4-WIFI6-POE-ETH, ESP32-P4 i ESP32-C6, Wi-Fi 6, Bluetooth 5 (LE), PoE Modul
- 3,290 RSD (Sa PDV-om)
- Pročitajte još
-
-
- HAT, dodatak
2-Channel RS232 Modul za Raspberry Pi Pico
- 790 RSD (Sa PDV-om)
- Dodaj u korpu
-
- 5. HAT, dodatak
PCIe na 2.5G ETH ploča (C) za Raspberry Pi 5
- 1,299 RSD (Sa PDV-om)
- Dodaj u korpu
Recenzije
Još nema komentara.