Name: 5.79 inča E-Paper displej (B), e-ink, 792x272, crveno/crno/belo, SPI povezivanje - malina314
SKU: w26891
Price: 3990 RSD
Availability: InStock

„Raspberry Pi ekran 5″, touch, DSI konekcija, SC1975“ je dodat u vašu korpu. Pregled korpe

Sledeći proizvod

5.79 inča E-Paper displej (B), e-ink, 792x272, crveno/crno/belo, SPI povezivanje

5.79 inča E-Paper displej (B), e-ink, 792x272, crveno/crno/belo, SPI povezivanje - Slika 2

3,990 RSD (Sa PDV-om)

5.79 inča E-Paper displej (B), e-ink, 792×272, crveno/crno/belo, SPI povezivanje

1 na zalihama

Šifra proizvoda: w26891 Kategorija: preko 3" Oznaka: lok 3-2 Težina proizvoda: 132 g

Opis

SKU: 26891
Part Number: 5.79inch e-Paper Module (B)
Brand: Waveshare

Korisne informacije: www.waveshare.com/wiki/5.79inch_e-Paper_Module_(B)

5.79inch E-Paper Module (B), E-Ink Display, 792×272, Red/Black/White, SPI Interface

5.79″ E-Paper Module (B)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments…

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)

Specifications

OPERATING VOLTAGE	3.3V/5V	DISPLAY COLOR	Red/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	152.50 × 58.50mm	FULL REFRESH TIME	24s
DISPLAY SIZE	139.00 × 47.74mm	REFRESH POWER	<50mW
DOT PITCH	0.1755 × 0.1755mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	792 × 272 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

PWR	Power on/off control
BUSY	Busy status output pin
RST	External reset, low active
DC	Data/Command selection (high for data, low for command)
CS	SPI chip selection, low active
CLK	SPI SCK pin
DIN	SPI MOSI pin
GND	Ground
VCC	Power (3.3V / 5V input)