Name: E-ink 3.52 inča E-Paper Displej (B), 360x240, Red/Black/White, SPI konekcija - malina314
SKU: w28811
Price: 2390 RSD
Availability: OutOfStock

E-ink 3.52 inča E-Paper Displej (B), 360x240, Red/Black/White, SPI konekcija

E-ink 3.52 inča E-Paper Displej (B), 360x240, Red/Black/White, SPI konekcija - Slika 2

2,390 RSD (Sa PDV-om)

E-ink 3.52 inča E-Paper Displej (B), 360×240, Red/Black/White, SPI konekcija

Nema na stanju

Šifra proizvoda: w28811 Kategorija: preko 3" Oznaka: lok z-12 Težina proizvoda: 68 g

Opis

SKU:28811
Part No.:3.52inch e-Paper HAT (B)
Brand:Waveshare

Korisne informacije: www.waveshare.com/wiki/3.52inch_e-Paper_HAT_(B)

3.52inch e-Paper display (B), e-ink display, 360×240, Red/Black/White, SPI Interface

3.52″ e-Paper (B)

low power, wide viewing angle, paper-like effect without electricity

Ideal for price tags, shelf labels, industrial instruments…

3.52inch e-Paper display (B), front view

Version Options

3.52inch e-Paper HAT (B) with driver board

Features at a glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Series / RDK X3 / Arduino / STM32)
Optional for e-Paper driver board:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3
- Adapting SPI interface for connecting with controller boards like Arduino / STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs

Specifications

operating voltage		display color	Red/Black/White
operating voltage	with driver board: 3.3V/5V	display color	Red/Black/White
interface	3-wire SPI, 4-wire SPI	grey scale	2
outline dimensions	Raw display: 84.70 × 54.41 × 0.85 (mm)	full refresh time	16s
outline dimensions	with driver board: 86.50 x 57.00 (mm)	full refresh time	16s
display size	74.51 × 49.67 (mm)	refresh power	<25mW
DOT PITCH	0.207 × 0.207 (mm)	standby current	<0.01uA (almost none)
RESOLUTION	360 × 240 pixels	viewing angle	>170°

Advantages of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Similar to the size of Raspberry Pi, Compatible With the size of Raspberry Pi 5 / 4B / 3B / 3B+

3.52inch e-Paper display (B) with driver board, onboard standard Raspberry Pi 40PIN GPIO header

* for reference only, the Raspberry Pi in the picture is NOT included.

Optional for e-Paper driver board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

3.52inch e-Paper display (B) with driver board, onboard SPI control interface

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output pin