2.15 inča E-ink Displej (G), 296x160, crvena/žuta/crna/bela, SPI konekcija
2.15 inča E-ink Displej (G), 296x160, crvena/žuta/crna/bela, SPI konekcija - Slika 2
2.15 inča E-ink Displej (G), 296x160, crvena/žuta/crna/bela, SPI konekcija - Slika 3
2.15 inča E-ink Displej (G), 296x160, crvena/žuta/crna/bela, SPI konekcija - Slika 4
2.15 inča E-ink Displej (G), 296x160, crvena/žuta/crna/bela, SPI konekcija - Slika 5

2,190 RSD (Sa PDV-om)

2.15 inča E-ink Displej (G), 296×160, crvena/žuta/crna/bela, SPI konekcija

1 na zalihama

Šifra proizvoda: w28995 Kategorija: Oznaka: Težina proizvoda: 34 g

Opis

SKU:28995
Part No.:2.15inch e-Paper HAT+ (G)
Brand:Waveshare

Korisne informacije: www.waveshare.com/wiki/2.15inch_e-Paper_HAT+_(G)

2.15inch e-Paper display (G), e-ink display, 296×160, Red/Yellow/Black/White, SPI Interface
2.15″ e-Paper (G)

low power, wide viewing angle, paper-like effect without electricity

Ideal for price tags, shelf labels, industrial instruments…

2.15inch e-Paper display (G), front view

Note: the driver board is optional, please refer to the Package Content for detailed part list
Version Options
2.15inch e-Paper HAT+ (G)2.15inch e-Paper HAT+ (G)
with driver board
Features at a glance
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / RDK X3 / Arduino / STM32)
  • Optional for e-Paper driver board:
    • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3
    • Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
    • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc.
    • Onboard voltage translator, compatible with 3.3V / 5V MCUs
Specifications
operating voltage Raw display: 3.3V display color Red/Yellow/Black/White
with driver board: 3.3V/5V
interface 3-wire SPI, 4-wire SPI grey scale 2
outline dimensions Raw display: 60.8 × 31.8 × 1.00 (mm) full refresh time 20s
with driver board: 65 × 34 (mm)
display size 48.10 × 26 (mm) refresh power <50mW
DOT PITCH 0.1625 × 0.1625 (mm) standby current <0.01uA (almost none)
RESOLUTION 296 × 160 pixels viewing angle >170°
Advantages of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

compatible with Raspberry Pi series boards, Jetson Nano, RDK X3

2.15inch e-Paper display (G) with driver board, onboard standard Raspberry Pi 40PIN GPIO header

* for reference only, the Raspberry Pi in the picture is NOT included.

Optional for e-Paper driver board

Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

2.15inch e-Paper display (G) with driver board, onboard SPI control interface

VCC Power (3.3V / 5V input)
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output pin
Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

2.15inch e-Paper display (G) with driver board, onboard voltage translator

2.15inch e-Paper display (G) with driver board, supports Raspberry Pi HAT+ standard
Application examples

Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags…

Outline dimensions

2.15inch e-Paper HAT+ (G)

2.15inch e-Paper display (G) and driver board, outline dimensions

Package content:

Weight: 0.026 kg

2.15inch e-Paper HAT+ (G)

  1. 2.15inch e-Paper HAT+ (G) x1
  2. GH1.25 9PIN cable x1
  3. Screws pack x1
12.15inch e-Paper HAT+ (G)
2
3

Dodatne informacije

Težina 34 g

Deklaracija

Šifra: w28995
Naziv: 2.15inch e-Paper HAT+ (G
Vrsta: Waveshare
Zemlja porekla: Kina
Zemlja uvoza: Kina
Uvoznik: MALINA 314 doo, Beograd
Telefon: 061-640-2013

Recenzije

Još nema komentara.

Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.

Povezani proizvodi