RP2350 4.3 inča touch ekran, 800 x 480, I2C, CAN, RS485, DO, DI, kućište
RP2350 4.3 inča touch ekran, 800 x 480, I2C, CAN, RS485, DO, DI, kućište - Slika 2
RP2350 4.3 inča touch ekran, 800 x 480, I2C, CAN, RS485, DO, DI, kućište - Slika 3
RP2350 4.3 inča touch ekran, 800 x 480, I2C, CAN, RS485, DO, DI, kućište - Slika 4
RP2350 4.3 inča touch ekran, 800 x 480, I2C, CAN, RS485, DO, DI, kućište - Slika 5

5,190 RSD (Sa PDV-om)

RP2350 4.3 inča touch ekran, 800 x 480, I2C, CAN, RS485, DO, DI, kućište

1 na zalihama

Šifra proizvoda: w33167 Kategorija: Oznaka: Težina proizvoda: 189 g

Opis

SKU: 33167
Part No.: RP2350-Touch-LCD-4.3B-BOX
Brand: Waveshare

Korisne informacije: www.waveshare.com/wiki/RP2350-Touch-LCD-4.3B

RP2350 4.3inch capacitive touch display Development Board, 800 × 480, 65K color, supports dual-core and dual-architecture

RP2350-Touch-LCD-4.3B

Integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfacesRP2350 4.3inch Capacitive Touch Display Development Board (B), front view and featuresRP2350 4.3inch Capacitive Touch Display Development Board (B), front view and features

RP2350 4.3inch Capacitive Touch Display Development Board (B), front view and features
RP2350-Touch-LCD-4.3B-BOX
With plastic case

Features

The RP2350-Touch-LCD-4.3B is a high-performance, highly integrated microcontroller development board designed by Waveshare. It integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive HD LCD, RTC chip, TF card slot, and so on, combined with various communication interfaces for easy development and integration into products.

  • RP2350B microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
  • Built in 520KB Static RAM, with onboard 16MB Flash and 2MB PSRAM
  • Type-C port for easier use
  • Onboard 4.3inch capacitive touch LCD, 800 × 480 resolution, 65K color
  • Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Onboard CAN, RS485, I2C and digital isolated I/O interfaces, etc.
  • Onboard voltage regulator, supports 7V ~ 36V wide range power supply
  • Supports passive and active digital input with bi-directional optocoupler isolation, and the active digital input supports positive and negative voltages
  • Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • Accurate clock and timer on-chip
  • Built-in temperature sensor for real-time monitoring of chip temperature
  • 12 × programmable I/O (PIO) state machines for custom peripheral support

Application Scenarios

RP2350 4.3inch Capacitive Touch Display Development Board (B), application scenarios

IPS Display Panel

Excellent display performance, 160° wide viewing angleRP2350 4.3inch Capacitive Touch Display Development Board (B) with IPS display panel

Capacitive 5-point touch

supports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interactionRP2350 4.3inch Capacitive Touch Display Development Board (B) with capacitive 5-point touch

Supports multiple peripherals

Supports the expansion of multiple peripherals via CAN, RS485, I2C and isolated I/O interfacesRP2350 4.3inch Capacitive Touch Display Development Board (B), supports multiple peripherals

Supports Two wiring methods

RP2350 4.3inch Capacitive Touch Display Development Board (B), supports back wiring

Back Wiring

Note: the case version does not support bottom wiring.

Dual-core, dual-architecture

The unique dual-core, dual-architecture capability of RP2350B allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environmentRP2350 4.3inch Capacitive Touch Display Development Board (B), dual-core, dual-architecture

Supports C/C++, MicroPython, Arduino IDE

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

What’s On Board

RP2350 4.3inch Capacitive Touch Display Development Board (B), onboard components

  1. RP2350B
    Dual-core and dual-architecture design, up to 150 MHz operating frequency
  2. Debug interface
  3. Optocoupler isolation
  4. 4.3inch display panel connector
  5. Status Indicators
    DONE: Lithium Batt charging completed indicator
    CHG: Lithium Batt charging indicator
    PWR: Power supply indicator
    (the CHG will blink and DONE will light on when connecting with DC power supply and without Lithium Batt connected or Batt switch is OFF)
  6. RTC Batt holder
    specification: CR927
  7. MX1.25 Lithium Batt header
    for 3.7V Lithium Batt, supports charging and discharging, with charging current of up to 500mA
  8. Batt power supply ON/OFF
    ON: connect the Batt; OFF: disconnect the Batt
  9. CAN and RS485 terminal resistor switches
    disabled by default
  10. Digital input
    5V ~ 36V, supports passive / active input (NPN or PNP)
  1. Input signal common terminal
    NC: dry contact passive input
    Connect to power supply positive: digital input low active, for NPN wet contact active input, 5V ~ 36V DC
    Connect to power supply negative: digital input high active, for PNP dry contact active input, 5V ~ 36V DC
  2. Digital output
    5V ~ 36V, open-drain output, output load: 450mA per channel (MAX)
  3. RS485 port screw terminal
  4. CAN port screw terminal
  5. I2C port screw terminal
    VOUT pin output 5V/3.3V (switching by onboard resistor)
  6. 7V ~ 36V DC power supply terminal
  7. Touch panel connector
  8. RESET button
  9. BOOT button
    Press it when resetting to enter download mode
  10. USB Type-C port
    for programming, USB 1.1 with device and host support
  11. TF card slot
  12. 2MB PSRAM
  13. 16MB Flash
  14. XL2515QF20

Dedicated plastic case

RP2350 4.3inch Capacitive Touch Display Development Board (B), support batch customization

Supports installing 60 × 30 × 6 (mm) (L × W × H) lithium Batt

RP2350 4.3inch Capacitive Touch Display Development Board (B), support batch customization

* for reference only, the Lithium Batt is NOT included.

Multiple installation methods

RP2350 4.3inch Capacitive Touch Display Development Board (B), support batch customizationRP2350 4.3inch Capacitive Touch Display Development Board (B), supports bottom wiringRP2350 4.3inch Capacitive Touch Display Development Board (B), supports back wiring

* for reference only, the rail bracket, wall bracket and monitor arm are not included.
The mounting hole spacing on the back of the case is 75mm.

Outline dimensions

RP2350-Touch-LCD-4.3B-BOX (with plastic case)

RP2350 4.3inch Capacitive Touch Display Development Board (B), outline dimensions

Package content:

Weight: 0.153 kg

RP2350-Touch-LCD-4.3B-BOX

RP2350-Touch-LCD-4.3B-BOX x1

RP2350-Touch-LCD-4.3B

Dodatne informacije

Težina 189 g

Deklaracija

Šifra: w33167
Naziv: RP2350-Touch-LCD-4.3B-BOX
Vrsta: Waveshare
Zemlja porekla: Kina
Zemlja uvoza: Kina
Uvoznik: MALINA 314 doo, Beograd
Telefon: 061-640-2013

Recenzije

Još nema komentara.

Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.

Povezani proizvodi