3,290 RSD (Sa PDV-om)
RP2350 2.8 inča Touch Displej, 240×320, IPS, SPI, Accelerometer & Gyroscope
1 na zalihama
Opis
RP2350 2.8inch Capacitive Touch Display Development Board, 240×320, IPS Panel, 5-point Touch, SPI Interface Display, Accelerometer And Gyroscope Sensor
SKU: 30706
Part No.: RP2350-Touch-LCD-2.8
Brand: Waveshare
Korisne informacije: www.waveshare.com/wiki/RP2350-Touch-LCD-2.8
Integrates SPI interface display, 240×320 Pixels, multiple peripheral interfaces
RP2350-Touch-LCD-2.8 is a low-cost, high-performance MCU board designed by Waveshare. Onboard 2.8inch capacitive touch display, capable of smoothly running GUI programs such as LVGL. Integrates Lithium battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, and so on, making it easy to develop and integrate into products quickly.
Key features include:
- RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Adopts unique dual-core and dual-architecture design: dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
- 520KB of SRAM, and 16MB onboard Flash memory
- Onboard 2.8inch LCD display, 240×320 resolution, 262K color
- Supports capacitive touch function controlled via I2C interface, 5-point touch, with interrupt support
- Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
- Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
- Drag-and-drop programming using mass storage over USB
- Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Excellent display performance, 262K color, wide viewing angle
Supports capacitive touch function controlled via I2C interface for flexible operation and smooth UI interaction, 5-point touch, with interrupt support
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc.
- RP2350A
Dual-core and dual-architecture design, up to 150 MHz operating frequency - W25Q128JVSIQ
16MB NOR-Flash - QMI8658
6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer - RTC chip
PCF85063 RTC chip - PCM5101 audio decoder
- Amplifier chip
- Volume adjustment knob
- Battery recharge manager
- ME6217C33M5G
Low dropout regulator, 800mA output (Max.) - TF card slot
- Battery power supply control button
Relevant driver program is required
- RESET button
- BOOT button
- 12PIN multi-functional header
- USB Type-C port
- I2C header
connecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions - UART header
- MX1.25 battery header
MX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging - RTC battery header
for connecting rechargeable RTC battery - Speaker header
Comes with 8Ω 2W 2030 speaker - Power indicator
- Charge indicator
Lithium battery charge indicator, lights up when charging, off when fully charged (the light status is uncertain when the battery is not connected)
* the Lithium battery is NOT Included, please refer to the Package Content for the detailed part list
Package content:
Weight: 0.05 kg
- RP2350-Touch-LCD-2.8 x1
- 8Ω 2W speaker ×1
- SH1.0 4PIN cable ×2
- SH1.0 12PIN cable ×1
Dodatne informacije
| Težina | 62 g |
|---|
Deklaracija
| Šifra: | w30706 |
| Naziv: | RP2350-Touch-LCD-2.8 |
| Vrsta: | Waveshare |
| Zemlja porekla: | Kina |
| Zemlja uvoza: | Kina |
| Uvoznik: | MALINA 314 doo, Beograd |
| Telefon: | 061-640-2013 |
Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.
Povezani proizvodi
-
- Nema na stanju
- 5. HAT, dodatak
2-Ch izolovani CAN Bus HAT za Raspberry Pi, Dual Chips Solution, Stackable Design
- 2,990 RSD (Sa PDV-om)
- Pročitajte još
-
-
- Ethernet
4-kanalni RS485 na ETH (B)
- 5,890 RSD (Sa PDV-om)
- Dodaj u korpu
Recenzije
Još nema komentara.