2,590 RSD (Sa PDV-om)
L76K GPS HAT za Raspberry Pi, GPS / BeiDou (BDS) / GLONASS / QZSS
1 na zalihama
Opis
SKU: 31932
Part No.: L76K GPS HAT
Brand: Waveshare
Korisne informacije: https://www.waveshare.com/wiki/L76K_GPS_HAT
Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS
The L76K GPS HAT is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function, built-in low-noise amplifier and sound surface filter, provides a good positioning experience of fast, accurate, high-performance.
- Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi / Jetson / RDK series boards
- Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS
- Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity
- Built-in SAW Filter for enhanced noise reduction performance
- Supports AGNSS
- UART communication baudrate: 4800~115200bps (9600bps by default)
- Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
- 4x LEDs for indicating the module operating status
- Comes with online development resources and manual (examples for Raspberry / Jetson / Arduino / STM32)
| GNSS parameters | |
|---|---|
| GNSS | GPS/GLONASS/BDS/QZSS |
| Chip Platform | AT6558R |
| L1 Band Receiver (Channels) |
32 tracking ch/ 72 acquisition ch |
| L1 Band Receiver SBAS |
N/A |
| A-GNSS | Support |
| Sensitivity （Acquisition） |
-148dBm |
| Sensitivity (Re-acquisition) |
-160dBm |
| Sensitivity (Tracking) |
-162dBm |
| TTFF (Time to first fix) Cold starts |
30s, Autonomous 5.5s, With AGNSS |
| TTFF (Time to first fix) Hot starts |
2s |
| Position accuracy | 2.0m CEP |
| Speed accuracy | 0.1m/s |
| Acceleration accuracy(Max) | 0.1m/s² |
| Timing accuracy | 30ns |
| Others | |
| Communication interface | UART |
| Baudrate | 4800~115200bps (9600bps by default) |
| Update rate | 1Hz (default), 5Hz (max) |
| Power supply voltage | 5V |
| Overall current consumption | < 55mA@5V (Continue mode) |
| Protocols | NMEA 0183, CASIC Proprietary Communication Protocol |
| Operating temperature | -40℃ ~ 85℃ |
| Dimensions | 65.00 × 30.50 (mm) |
Compatible with Raspberry Pi / Jetson / RDK series boards
* for reference only, please refer to the part list for detailed package content.
supports GPS, Beidou(BDS), Glonass, QZSS
Augment system is aimed at improving the accuracy, integrity, reliability, and availability of positioning and navigation
Supports A-GNSS augment system
Vehicle tracking, asset tracking, security systems, industrial PDAs, GIS applications, etc.
- L76K module
- CP2102
- CAT24C32
- RT9193-33
power chip - GNSS configuration button
- Standby mode switch
- Status indicators
- Raspberry Pi 40PIN GPIO header
for connecting with Raspberry Pi
- USB TO UART port
- GNSS antenna connector
- Battery holder
supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts - UART selection jumper
A: control the L76K via USB to UART
B: control the L76K via Raspberry Pi
C: access Raspberry Pi via USB to UART
Weight: 0.165 kg
- L76K-GPS-HAT x1
- GPS Antenna x1
- 2x20PIN header x1
- USB Type-A to Micro-B cable x1
- Screws pack x1
Dodatne informacije
| Težina | 152 g |
|---|
Deklaracija
| Šifra: w31932 |
| Naziv: L76K GPS HAT |
| Vrsta: Waveshare |
| Zemlja porekla: Kina |
| Zemlja uvoza: Kina |
| Uvoznik: MALINA 314 doo, Beograd |
| Telefon: 061-640-2013 |
Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.
Recenzije
Još nema komentara.