2,999.00 RSD (Sa PDV-om)
RS485 CAN HAT (B) izolovani, za Raspberry Pi, 2-Ch RS485, 1-Ch CAN
2 na zalihama
Opis
SKU: 23227
Part Number: RS485 CAN HAT (B)
Brand: Waveshare
2-Ch RS485 and 1-Ch CAN, SPI communication
Bulit-In Power Supply Isolation, ADI Magnetical Isolation, And TVS Diode, Etc.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN
- 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485
- Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time
- Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
- Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
- Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
- Onboard 120Ω terminal resistor, configured by jumper
- Onboard terminals and pin headers, more convenient connection
- Breakout SPI control pins, for connecting with host control boards
EXPANDED INTERFACE | 2-Ch RS485 + 1-Ch CAN |
---|---|
COMMUNICATION INTERFACE | SPI |
CAN CONTROLLER | MCP2515 |
CAN TRANSCEIVER | SIT65HVD230DR/SN65HVD23D |
CAN BAUD RATE | ≦1Mbps |
UART EXPANSION CHIP | SC16IS752 |
RS485 TRANSCEIVER | SP3485 |
RS485 BAUD RATE | 300~921600 bps |
POWER SUPPLY | External power supply terminal OR Raspberry Pi |
EXTERNAL POWER SUPPLY RANGE | DC 8~28V |
OPERATING VOLTAGE | 3.3V |
DIMENSIONS | 65 × 56.5 mm |
Enable Isolated And Stable RS485 And CAN Capability For Your Raspberry Pi
Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards
CAN: Adopts Controller MCP2515 With CAN Transceiver
RS485: Adopts SC16IS752 And SP3485 Dual-Chip Combination
- Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
- Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption
Chip Features
- MCP2515
CAN controller - SIT65HVD230DR/SN65HVD23D
CAN transceiver - SP3485
RS485 transceiver - SC16IS752
UART expansion - π163M31
digital isolator - B0505LS-1W
Power supply isolation
Others
- Power supply interface
DC 8~28V, can power the HAT and Raspberry Pi - RS485 bus interface
Connect via screw terminals/pin header - CAN bus interface
Connect via screw terminals/pin header - Raspberry Pi GPIO header
- SPI control header
for connecting with host boards like STM32/Arduino - CAN terminal resistor jumper
Switch to 120Ω by default - RS485 Terminal resistor jumper
Switch to 120Ω by default - Power Indicator
WIKI: www.waveshare.com/wiki/RS485_CAN_HAT_(B)
- PACKAGE CONTENT
Dodatne informacije
Težina | 61 g |
---|
Deklaracija
Šifra: w23227 |
Naziv: RS485 CAN HAT |
Vrsta: Waveshare |
Zemlja porekla: Kina |
Zemlja uvoza: Kina |
Uvoznik: MALINA 314 doo, Beograd |
Telefon: 061-640-2013 |
Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.
Recenzije
Još nema komentara.