HiFiBerry DAC2 Pro

7,999 RSD (Sa PDV-om)

HiFiBerry DAC2 Pro

2 na zalihama

Šifra proizvoda: 4260439550767 Kategorija: Oznaka: Težina proizvoda: 34 g

Opis

This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering.

Our HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro. It comes with integrated dual-domain low-jitter clocks and gold-plated RCA connectors. It features and on-board headphone amplifier and can be upgraded with the DSP add-on module.
It can be simply plugged onto your Raspberry Pi, without any soldering.

OVERVIEW

The HiFiBerry DAC2 Pro is a high-resolution digital-to-analog and analog-to-digital converter for the Raspberry Pi (newer models with 40 pin GPIO connector). This is a special sound card for the Raspberry Pi, optimised for one specific use case: affordable high-quality audio playback.

FACTS

  • Stereo output
  • Integrated headphone amplifier
  • can be equipped with an additional Digital Signal Processor (DSP) for flexible audio processing
  • Dedicated 192kHz/24bit high-quality Burr-Brown DAC
  • Hardware volume control for DAC. You can control the input and output parameters using “alsamixer” or any application that supports ALSA mixer controls.
  • Connects directly to the Raspberry Pi, no additional cables needed
  • No soldering, comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi, it is conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.
  • Compatible with all Raspberry Pi models with a 40-pin GPIO connector
  • Directly powered from the Raspberry Pi, no additional power supply
  • Two ultra-low-noise linear voltage regulators for optimal audio performance
  • Low-jitter dual-domain clock for optimised clock decoupling from the Raspberry Pi
  • HAT compliant, EEPROM for automatic configuration
  • Gold plated RCA output connectors
  • Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi
  • Audio connector to connect analog audio amplifier

HARDWARE

1 Burr-Brown DAC
2 Low-jitter clock circuit
3 Headphone amplifier

CONNECTORS AND JUMPERS

 

1 Line output
2 Headphone output
3 Analog output (compatible with Aamp60)
4 DSP expansion header (compatible with DSP add-on board)

OUTPUT CONNECTOR J1

This connector can be used to connect to external components, e.g. an amplifier. The output is connected in parallel to the RCA jacks. Pin 1 is on the top left.

+5V 1 2 R
GND 3 4 GND
+5V 5 6 L

SPECIFICATIONS

Maximum output voltage 2.1Vrms
DAC signal-to-noise ratio 112db typical
DAC THD+N -93db typical
Frequency response 10Hz-70kHz -3dB
Power consumption <0.3W
Sample rates 44.1-192kHz

CONFIGURATION

Overlay for config.txt:
dtoverlay=hifiberry-dacplus

MEDIA

ADDITIONAL DOCUMENTATION

Dodatne informacije

Težina 34 g

Deklaracija

Šifra: 4260439550767
Naziv: HiFiBerry DAC2 Pro
Vrsta: HiFiBerry
Zemlja porekla: Nemačka
Zemlja uvoza: Nemačka
Uvoznik: MALINA 314 doo, Beograd
telefon: 061-640-2013

Recenzije

Još nema komentara.

Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.

Možda će vam se svideti …

Povezani proizvodi