Originalna cena je bila: 3,090 RSD.1,999 RSDTrenutna cena je: 1,999 RSD. (Sa PDV-om)
Ekran 2.9 inča, za Raspberry Pi (e-ink displej 2.9”), 296 x 128, fleksibilni
1 na zalihama
Opis
Popust je aktivan od 1.5. do 31.5. ili do isteka zaliha
SKU: 16565
Part Number: 2.9inch e-Paper HAT (D)
Brand: Waveshare
wiki: www.waveshare.com/wiki/2.9inch_e-Paper_HAT_(D)
Partial Refresh Support, Bendable, Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for industrial instruments, smart wearable-devices, and so on
- Flexible e-Paper, the display section is bendable (DON’T bend the FPC section)
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
- Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
| OPERATING VOLTAGE | 3.3V / 5V | DISPLAY COLOR | Black/White |
|---|---|---|---|
| INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 2 |
| OUTLINE DIMENSIONS | 79.0 × 36.7mm | FULL REFRESH TIME | 2s |
| DISPLAY SIZE | 66.90 × 29.06mm | PARTIAL REFRESH TIME | 0.3s |
| DOT PITCH | 0.227 × 0.226mm | REFRESH POWER | 26.4mW(typ.) |
| VIEWING ANGLE | >170° | STANDBY CURRENT | <0.01uA (almost none) |
| RESOLUTION | 296 × 128 pixels | ||
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Compared With Normal E-Paper Panels, This Flexible Panel Allows Bending Without Being Damaged, And It’s Thinner And Lighter
Compatible With Raspberry Pi Series Boards, Jetson Nano
For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/STM32/Arduino
| VCC | 3.3V/5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data / Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output |
| PWR | Power on/off control |
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags…
Package Content
Weight: 0.026 kg
- 2.9inch e-Paper (D) x1
- e-Paper Driver HAT x1
- RPi screws pack (2pcs) x1
- PH2.0 20cm 8Pin x1
1
2
3
4
Dodatne informacije
| Težina | 46 g |
|---|
Deklaracija
| Šifra: w16565 |
| Naziv: Ekran 2.9 inča, za Raspberry Pi (e-ink displej 2.9”), 296 x 128, fleksibilni |
| Vrsta: Waveshare |
| Zemlja porekla: Kina |
| Zemlja uvoza: Kina |
| Uvoznik: MALINA 314 doo, Beograd |
| Telefon: 061-640-2013 |
Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.
Povezani proizvodi
-
- Akcija!
- do 3"
2.13 inča NFC e-Paper, bez baterija
- Originalna cena je bila: 3,490 RSD.2,999 RSDTrenutna cena je: 2,999 RSD. (Sa PDV-om)
- Dodaj u korpu
Recenzije
Još nema komentara.