Name: EC200U-EU C4-P01 razvojna ploča za QuecPython, LTE Cat-1 / BT, GNSS, Multi-Mode & Multi-Band - malina314
SKU: w27095
Price: 7790.00 RSD
Availability: InStock

7,790.00 RSD (Sa PDV-om)

EC200U-EU C4-P01 razvojna ploča za QuecPython, LTE Cat-1 / BT, GNSS, Multi-Mode & Multi-Band

1 na zalihama

Šifra proizvoda: w27095 Kategorija: razno Oznaka: lok k-15 Težina proizvoda: 192 g

Opis

SKU: 27095
Part Number: EC200U-EU C4-P01
Brand: QUECTEL

Korisne informacije: www.waveshare.com/wiki/EC200U-EU-C4-P01

Features

Equipped with EC200U-EU LTE Cat 1 wireless communication module, multi-mode & multi-band support.
Onboard 40PIN GPIO header, compatible with most Raspberry Pi HATs.
5 LEDs for indicating module operating status.
Supports TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS protocols, etc.
Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS).
Onboard Nano SIM card slot and eSIM card slot, dual card single standby.
Onboard MIPI connector for connecting MIPI screen and is fully compatible with Raspberry PI peripherals.
Onboard camera connector, supports customized SPI cameras with a maximum of 300,000 pixels.
Provides tools such as QPYcom, Thonny IDE plugin, and VSCode plugin, etc. for easy learning and development.
Comes with online development resources and manual (example in QuecPython).

EC200U-EU C4-P01 Development Board Designed For QuecPython, Multi-Mode & Multi-Band Support, LTE Cat-1 / Bluetooth Communication, GNSS Positioning, Compact Size & Cost-Effective

EC200U-EU C4-P01 Development Board

Compact & Portable Development Board Designed for QuecPython

Supports LTE Cat-1 / Bluetooth Communication, GNSS Positioning

EC200U C4-P01 development board, front view

Features At A Glance

The EC200U-EU C4-P01 development board is equipped with EC200U-EU LTE Cat 1 wireless communication module, with maximum data rate up to 10 Mbps downlink and 5 Mbps uplink, supports multi-mode & multi-band and is cost-effective. Designed in the compact and unified form factor, compatible with Quectel multi-mode LTE Standard EC20-CE. Onboard Type-C port for easy development with just a USB Type-C cable. Onboard 40PIN GPIO pin header which is compatible with most Raspberry Pi HATs.

Equipped with EC200U-EU LTE Cat 1 wireless communication module, multi-mode & multi-band support
Onboard 40PIN GPIO header, compatible with most Raspberry Pi HATs
5 LEDs for indicating module operating status
Supports TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS protocols, etc.
Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS)
Onboard Nano SIM card slot and eSIM card slot, dual card single standby
Onboard MIPI connector for connecting MIPI screen and is fully compatible with Raspberry PI peripherals
Onboard camera connector, supports customized SPI cameras with a maximum of 300,000 pixels
Provides tools such as QPYcom, Thonny IDE plugin, and VSCode plugin, etc. for easy learning and development
Comes with online development resources and manual (example in QuecPython)

Specifications

MODEL		EC200U-EU
Product Picture
Applicable Region		Europe, Middle East, Africa, Australia, New Zealand, Brazil
FREQUENCY BAND
LTE-FDD		B1, B3, B5, B7, B8, B20, B28
LTE-TDD		B38, B40, B41
GSM / GPRS / EDGE		GSM: B2, B3, B5, B8
GNSS
Bluetooth		Bluetooth 4.2 (BR/EDR)
Wi-Fi Scan		2.4 GHz 11b (Rx)
DATA TRANSMISSION
CAT 1		LTE-FDD: DL 10 Mbps; UL 5 Mbps LTE-TDD: DL 8.96 Mbps; UL 3.1 Mbps
NB-IoT		N/A
Cat-M		N/A
GSM / GPRS / EDGE		GSM: DL 85.6 Kbps; UL 85.6 Kbps
OTHERS
Type-C USB Port	Supports AT commands testing, GNSS positioning, firmware upgrading, etc.
Communication Protocol		TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS
SIM Card		Nano SIM and eSIM, dual card single standby
Indicator		P01: Module Pin 1, default as EC200A-XX PWM0 P05: Module Pin 5, NET_MODE indicator SCK1: SIM1 detection indicator, lights up when SIM1 card is inserted SCK2: SIM2 detection indicator, lights up when SIM2 card is inserted PWR: Power indicator
Buttons		PWK: Power ON/OFF RST: Reset BOOT: Forcing into firmware burning mode USB ON/OFF: USB power consumption detection switch
Antenna Connectors		LTE main antenna + DIV / WIFI (scanning only) / Bluetooth antenna + GNSS antenna
Operating Temperature	-30 ~ 75°C
Storage Temperature	-45 ~ 90°C

Type-C Interface

Easy To Develop With Just A USB Type-C Cable

EC200U C4-P01 development board with Type-C interface

Onboard 40PIN GPIO Header

Compatible With Most Raspberry Pi HATs

EC200U C4-P01 development board with 40PIN GPIO pin header

Supports Various Development Tools

Provides Tools Such As QPYcom, Thonny IDE Plugin, And VSCode Plugin, Etc. For Easy Learning And Development

EC200U C4-P01 development board supports various development tools

What’s Onboard

EC200U C4-P01 development board onboard components

Onboard Components

EC200U module
PWR Power indicator
NET Network indicator
PWM function indicator
SIM1 indicator
lights up when SIM1 card is inserted
SIM2 indicator
lights up when SIM2 card is inserted
Power ON/OFF button
Reset button
BOOT button
Press before powering on to force firmware burning mode
USB detection ON/OFF
Normally closed: USB can be connected normally;
Normally open: Type-C supplies power only to the evaluation board, used for module power consumption measurement

Interfaces

Raspberry Pi GPIO Header
Compatible with Raspberry Pi HATs, for more details, please refer to Pinout Definition
Power ON/OFF jumper
Connect: auto turn on, short press PWK button to restart
Disconnect: short press PWK button to power on, long press to power off
1.8V output jumper
Connect: outputs 1.8V externally
Disconnect: used to test power consumption
Module power supply jumper
Connect: DCDC to power the module

SD power supply selection
Connect: enable SD power supply
GNSS active power supply selection
Connect: enable GNSS active power supply
SIM card slot 1
for Nano SIM card
SIM card slot 2
for eSIM card
SD card slot
Before using the SD card, enable SD power supply in the 10-Pin Header
MIPI interface
Supports MIPI LCD and is fully compatible with Raspberry Pi peripherals
Camera interface
Supports customized SPI cameras with a maximum of 300,000 pixels
Reserved matrix keyboard pads
users can customize soldering or connection of the keyboard buttons （Note: the keyboard buttons are not included by default）
USB Type-C port
ADC testing points
ADC0_IN/ADC1_IN ADC measurement interface
LTE main antenna connector
GNSS antenna connector
DIV/Wi-Fi/Bluetooth antenna connector
MIC & SPK header