Gigabit / 2.5G Dual Eth Base Board For Raspberry Pi CM5. Dual RJ45 Eth Ports, Dual 4K, Dual MIPI Interfaces
Gigabit / 2.5G Dual Eth Base Board For Raspberry Pi CM5. Dual RJ45 Eth Ports, Dual 4K, Dual MIPI Interfaces - Slika 2
Gigabit / 2.5G Dual Eth Base Board For Raspberry Pi CM5. Dual RJ45 Eth Ports, Dual 4K, Dual MIPI Interfaces - Slika 3
Gigabit / 2.5G Dual Eth Base Board For Raspberry Pi CM5. Dual RJ45 Eth Ports, Dual 4K, Dual MIPI Interfaces - Slika 4

6,199 RSD (Sa PDV-om)

Gigabit / 2.5G Dual Eth Base Board For Raspberry Pi CM5. Dual RJ45 Eth Ports, Dual 4K, Dual MIPI Interfaces

1 na zalihama

Šifra proizvoda: w32176 Kategorija: Oznaka: Težina proizvoda: 32 g

Opis

SKU: 32176
Part No.: CM5-DUAL-ETH-BASE
Brand: Waveshare

Gigabit / 2.5G Dual Ethernet Base Board For Raspberry Pi CM5. Dual RJ45 Ethernet Ports, Supports Dual 4K Display Outputs And Dual MIPI Interfaces, Onboard 40Pin GPIO Header
Dual Ethernet Base Board for CM5

Designed for Raspberry Pi Compute Module 5

Designed for Raspberry Pi Compute Module 5 boards, front view

Specifications
CM5 socket Suitable for all variants of Compute Module 5
Networking 1000M Ethernet RJ45 port
2500M Ethernet RJ45 port
Connector Raspberry Pi 40PIN GPIO Header
USB USB 3.2 Gen1 × 1
USB 2.0 × 2
MIPI 4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector)
Video HDMI port × 2, supports dual 4K display outputs
M.2 M.2 M KEY (PCIe Gen2/3 x 1)
Storage TF card socket for Compute Module 5 Lite (without eMMC) variants
Fan Header 5V, 4PIN JST-SH PWM fan connector
Others Onboard EEPROM and Encryption chip
Power Input 7V~36V wide voltage range
Dimensions the base board: 109.0 × 91.5 (mm)

Check the Compute Module 5 variants

Connecting with Compute Module 5

Sstandard CM5 socket and color-coded Raspberry Pi 40PIN GPIO header
Suitable for Compute Module 5 Lite / eMMC series module

1G / 2.5G Dual Ethernet Base Board connecting with Compute Module 5

* for reference only, please refer to the package content for detailed part list

Supports connecting to M.2 NVMe Drive

Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive

Supports M.2 NVMe Solid State Drive

* for reference only, please refer to the package content for detailed part list

Applicable M.2 drive sizes

Suitable with M.2 Solid State Drive dimensions

NVMe Drive Slot Support

Suitable with Solid State Drive Interface

* Only supports the NVMe Protocol Solid State Drives.

More rich interfaces

More rich interfaces

What’s On Board

1G / 2.5G Dual Ethernet Base Board designed for CM 5, onboard components

  1. CM5 socket
    Suitable for all variants of Compute Module 5
  2. 40PIN GPIO header
    Suitable for connecting to various HAT / HAT+ modules
  3. Programming
    used for eMMC burning
  4. PSW power button
    Long press to force power off, short press to soft power off or on
  5. BOOT button
    Press before powering on and release it after powering on to enter burning mode
  6. STAT LED
    Dual LED indicators
  7. DC power jack
  8. DC-DC power chip
  9. M.2 M KEY
    Supports 2280 / 2260 / 2242 / 2230 NVMe Solid State Drives or AI modules
  10. M.2 LED
    keeps blinking when NVMe drive reading / writing
  11. MIPI Interfaces
    for connecting to DSI displays or CSI cameras
  12. HDMI ports
    Supports dual 4K outputs
  1. RTC battery header
    for connecting an external RTC battery to maintain real-time clock operation
  2. USB 2.0 HUB chip
  3. USB 2.0 ports
  4. USB 3.2 Gen1 port
    supports up to 5 Gbps reading / writing speed
  5. 2500M Ethernet RJ45 port
    supporting 10M / 100M / 1000M / 2500M network connections
  6. 1000M Ethernet RJ45 port
    supporting 10M / 100M / 1000M network connections
  7. FAN header
    for connecting the cooling fan, 5V, 4PIN JST-SH PWM fan connector
  8. EEPROM and encryption chip
  9. USB to 2500M Ethernet chip
  10. TF card slot
    for connecting a TF card with pre-burnt image (Lite variant ONLY)
  11. Other function pins
    Hardware disable function, write protection and chip address selection
  12. IO-VREF selection
    CM5 IO logic level: 3.3V (default) or 1.8V
Outline dimensions

1G / 2.5G Dual Ethernet Base Board designed for CM 5, outline dimensions

About Compute Module 5

Raspberry Pi Compute module 5, front view

Newly upgraded, more powerful
  • Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
  • More options for RAM (2GB / 4GB / 8GB / 16GB)
  • More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
  • Faster eMMC Flash storage, up to 200 Mbps data rate
  • Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
  • Adopts B to B connectors, most compatible with Compute Module 4
  • Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
  • Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules

Package content

Weight: 0.08 kg

  1. CM5-DUAL-ETH-BASE x1
  2. Screws pack x1
1CM5-DUAL-ETH-BASE
2

Dodatne informacije

Težina 32 g

Deklaracija

Šifra: w32176
Naziv: CM5-DUAL-ETH-BASE
Vrsta: Waveshare
Zemlja porekla: Kina
Zemlja uvoza: Kina
Uvoznik: MALINA 314 doo, Beograd
Telefon: 061-640-2013

Recenzije

Još nema komentara.

Samo prijavljeni korisnici koji su kupili ovaj proizvod mogu ostaviti komentar.

Povezani proizvodi